Advice for Measuring Oil Filter Life

Noria Corporation
Tags: oil filters, contamination control, particle counting

Advice for Measuring Oil Filter Life

"We have a filter that appears to have been in service for nearly two years without any indication of blocking. Is this normal?"

While contaminant ingression varies according to environmental and production/maintenance activity, some filter manufacturers specify a life of six months. It is generally a good strategy to take an upstream and downstream particle count to ascertain if the filter is still working properly. If not, replace the element. Filters with a high dirt-holding capacity will last longer.

Consider the maintenance history and try to establish an average life for previous elements, as this will give some indication if two years is abnormal.

However, there are a number of ways in which the filter may fail without tripping the indicator, and this may lead the unwary to believe the filter is a good value. Without a particle count program, it is almost impossible to determine a failed filter. Such failures as a collapsed element, split pleat, poor adhesion on the seam, a sticking bypass valve or even a faulty indicator are typically not detectable without a particle count program to monitor changing contaminant levels.

Keeping tabs on the performance of filters is essential to machinery reliability. Yet too often, many people in the maintenance field seem to be oblivious to the importance and methods of doing so. The best strategy is the proactive strategy. You don’t have to detect and diagnose a problem that doesn’t exist.

The following are a few rock-solid ideas to avert problems with filters:

Used filters are often a dead giveaway of filtration problems. Learn to read the warning signs. After all, the filter is a bone pile of past problems generated within the machine and transported by the fluid. Inspect used filters for: